INDOM

INDOM introduces domain-specific initial conditions. These will supersede default initial conditions specified in PARAM.4, and can be overwritten by element-specific initial conditions in data block INCON.

Record INDOM. l

Free format for 2 parameters, or Format (A5, 2X, A3)

MAT, StateName

MAT name of a reservoir domain, as specified in data block ROCKS.

StateName (optional) phase state name with 3 characters. It is needed only when the system cannot figure out its phase state through the primary variables.

Record INDOM.2

Free format for as more as 12 parameters, Format (4E20.13)

Xl, X2, X3, ...

A set of primary variables assigned to all grid blocks in the domain specified in record INDOM.l. Different sets of primary variables are used for different EOS modules; see the description of EOS modules. For formatted input, when more than four primary variables are used, more than one line (record) must be provided.

Record INDOM.3

A blank record closes the INDOM data block. Repeat records INDOM.l and INDOM.2 for as many domains as desired. The ordering is arbitrary and need not be the same as in block ROCKS.

Used in: All EOS modules

Example:

INDOM // an example for ECO2, no brine, with 2 tracers, in aqueous condition

ROCK1

0.4E+07, 0.0*3, 85.0 // pressure, mass fraction for CO2, tracer1, and tracer2, and temperature